Getting started can be difficult as there is a lot of information and maybe parts you have never worked with before. We have broken down the construction into: Parts for your machine, building the machine, Electrical installation and settings.
First of all, you need to get access to all the drawings, go here: Buy the drawings
Parts for your machine
Start by finding all the parts for the machine so you can start building it. You can wait with the electricity if you want and just concentrate on the machine. Before you start, you need to get hold of the parts and the list of what is needed can be found here: Parts for your machine.
The machine can be built in 3 different sizes, so be sure to find parts for your particular machine. The smaller machines have less parts.
Building the machine
Once you have your parts, the build can begin. Go to this page: Drawings and video instructions.
At the beginning of this guide you have to prepare plates and profiles and it is a step that has to be done, so start with that.
Electrical installation
When the machine is ready, the electrical box must be built. It sounds difficult, but if you follow our guide, it’s more like Lego. You will find the instructions on the same page as above but further down.
Settings.
Finally, the machine can be set up. You can do this on this page: Start here to set up and work with your machine. Follow the guide that suits your equipment. There are also video instructions further down the same page.
Good luck and ask your questions in the forum and we and hopefully others will answer your questions.